+1 (347) 474-1028

# Estimate how much magnetic field an electromagnet can produc

Posted By George smith

Estimate how much magnetic field an electromagnet can produce at its gap, Hg. Assume that the pole-piece is horseshoe-shaped, with a total length of 1m, and the gap is 10 cm long. The pole-piece is wr

# Design an arduino circuit. Interface bluetooth module with a

Posted By George smith

Design an arduino circuit. Interface bluetooth module with arduino and use an android mobile to turn on a fan connected to your arduino.

# How to interface arduino with a bluetooth module and control

Posted By George smith

How to interface arduino with a bluetooth module and control fans and led’s?

# Why AC frameworks are favored over DC frameworks? Explain wi

Posted By George smith

Why AC frameworks are favored over DC frameworks? Explain with reasons

# Need help with few question from ECT 284/246 Active Devices

Posted By George smith

Need help with few question from ECT 284/246 Active Devices

# A 16-mH inductor and a 15-mH inductor are connected in serie

Posted By George smith

A 16-mH inductor and a 15-mH inductor are connected in series with a 1-A current source. Find (a) the equivalent inductance and (b) the total energy stored.

# If =100, and Vin=0.2cos(2 f*t)+2 V where f=100 Hz, compute w

Posted By George smith

If =100, and Vin=0.2cos(2 f*t)+2 V where f=100 Hz, compute what you would expect for Vce. Assume Vcc=5V, Rb=20 k , Rc=200 from the given image.

# i need an online tutor to help me for one hour in electronic

Posted By George smith

i need an online tutor to help me for one hour in electronic circuit subject are capacitors and inductors thank you very much

# photodiode and dark current: Given the dark current Id of a

Posted By George smith

photodiode and dark current: Given the dark current Id of a PD, show that for SNR = 1, the photocurrent is:

# Hey, got some question. 1. Write the C statement needed to a

Posted By George smith

Hey, got some question. 1. Write the C statement needed to arm the Port J interrupt? 2. What does placing asm(“cli”) at the beginning of an ISR do? 3. Explain what the software interrupt (SWI) does. 4

Proudly powered by WordPress Theme: Mediaphase Lite by ThemeFurnace.